The Ghost Immobiliser
Immobilisers are a potent tool in the fight against vehicle theft. They stop the car from starting if it doesn't have an ignition key fob. They also work well to stop hotwiring or traditional methods of vehicle theft. However, newer methods like key replication and relay theft are becoming more common.
The Ghost Immobiliser was designed to combat these trends and make your vehicle unnoticeable. It doesn't use LED indications or radio signals or key fobs. It is quiet and stealthy.
Easy to install
The Ghost Immobiliser is a groundbreaking device, connects with the CAN data network of your vehicle in order to prevent key cloning or theft. It is an TASSA approved product, and is approved by insurance companies. It operates silently and is almost undetectable to thieves. It uses buttons on your steering wheel, center console, and doors to create an unique pin code sequence that has to be entered before you are able to start your car. You can create as many as 20 different sequences to increase security. The system is simple to install and does not require any additional wiring or hardware.
To get the most effective results, it is recommended that you use a reputable CAN-immobiliser installer who is skilled in your particular vehicle. Ideally, they'll have a workshop close to you that you can visit to complete your installation. There is also various tools and equipment that can aid you in the installation. They will have basic hand tools, a multimeter and insulation tape as well as heat shrink tubing to protect connections. A user manual will provide specific instructions for the wiring of your vehicle.
Before beginning the installation Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. It is essential to verify the exact location of the CAN H and L wires, since the wrong identification could result in unintentional system integration. It is also a great idea to label or mark the wires. Make use of a multimeter to ensure that the power source is supplying an uninterrupted 12V.
Advanced thieves can use various methods to evade Ghost Immobilisers, including blocking or spoofing. These techniques are based on amplifying signals from the key fob to your vehicle's electronic controller unit. With advanced anti-jamming technologies and a constant monitoring system your vehicle, it can be protected from these sophisticated attacks.
Security enhancing
Ghost immobilisers provide an additional layer of protection to your vehicle from theft. It is a PIN protection system that can be entered using buttons on the dashboard or steering wheel which makes it more difficult for thieves to take your car. The device is also designed to be hidden inside your vehicle, with no any other lights or signals that could warn thieves of its presence. It communicates with your vehicle's ECU on the data bus, which means it isn't susceptible to the same hacking and relay attacks that can disable conventional security systems.
The system is an excellent investment for those who own prestige vehicles, as they are at a higher chance of theft due to their value and their popularity. The enhanced features of the system protect your vehicle from key cloning and ECU swapping. Some ghost immobilisers can also be paired with an app, allowing you can easily arm and disarm them. They also come with an option for service/valet that permits you to temporarily disable them while your vehicle is being serviced or repaired.
Another benefit of ghost immobilisers is that it does not require wire cutting. This is a nice option, particularly if you have a newer car which does not come with built-in immobiliser technology. Certain systems are able to integrate with an GPS tracking device, providing additional security for your vehicle. Having a GPS tracker may also help to reduce the cost of insurance. If you opt to buy an immobiliser for ghosts, make sure that it is TASSA verified and a professional installer installs it for you.
Compatible with all major models and brands
The Ghost Immobiliser is made to work with all major car models and makes, protecting your precious possessions from theft. It makes use of buttons on your steering wheel, the centre console, or door panels to generate an individual pin code which must be entered before you can drive your car. The system is tamper-proof and undetectable. It is also comes with a three-year guarantee. It is also fully endorsed by insurance companies. This means that you can reduce your costs.
In contrast to standard immobilisers that make use of your key fob to control the car's ignition, the Ghost system is connected directly to the engine controller unit through the CAN data bus. This means it is impervious to tampering, and is virtually impossible to remove or disable and cannot be hacked by organised car thief gangs. In addition to this, the Ghost system can be paired with an encrypted iPhone application that allows remote monitoring and management.
You can set a PIN code that is simple to remember, yet mathematically impossible for thieves to determine. You can customize and change the PIN at any time to keep your vehicle secure even if it's situated in a parking area or on the street. You can also choose a valet or service mode if you need someone else to drive your vehicle for a short period, for example when it's in garage for servicing. This feature is also an excellent way to stop your vehicle from being taken by a scammer mechanic. You can opt for a Ghost Call alert to give you extra security. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser shields your vehicle from theft methods like key cloning or relay attacks. It connects to the car's CAN network and blocking communication with the engine ECU. This makes it impossible for thieves to duplicate or hack your car, making the installation of this system a good idea for any driver.
Installed, you'll need to enter a pin number of up to 20 digits using the buttons on the dashboard as well as the steering wheel to begin the car. The system is completely hidden and thus unnoticeable to thieves. It doesn't emit radio frequency signals. It can also be set to an individual-changeable PIN code which further adds to its security. The system is designed to prevent circuit-cutting, making it almost impossible to tamper.
Some systems allow you to connect directly to the immobiliser via an app on your phone to disarm it immediately if you forget your PIN. Some even come with the option of a service/valet mode, which allows you to start your vehicle temporarily, for instance, when you have to drop it off for servicing or valet parking.
The Ghost Immobiliser is also undetectable by thieves, since it does not transmit radio signals. This is an important benefit over other aftermarket security systems. It is also easy to use and doesn't require complex wiring. It can be used in conjunction with dash cams for added security. This dash cam is the Thinkware F70, which features clear & crisp HD 1080p dashcam footage, Format Free Technology and parking mode. The system can also be hardwired for optimum performance and durability.
Installation
It is crucial to select the most reliable immobiliser ghost in order to protect your car from thieves. This device can help prevent car theft by blocking the communication between the engine controller unit (ECU) and key fobs. This device prevents thieves from stealing the signal to start your vehicle. It also can detect if it has been tampered and notify the owner of the vehicle.
The device is easy to install and integrates with your vehicle's existing systems. It doesn't require any modification to the wiring of the vehicle and can be installed in a hidden place, like under the dashboard. Follow the steps in the manual to make sure that the device is properly installed. It is also essential to test the system after installing it. This will confirm that the immobiliser ghost is functioning exactly as it was intended to.
You can buy an Autowatch Ghost 2 immobiliser and have it installed by a certified installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to steal or bypass the system. The installation process usually takes about 2 hours.
It is recommended to look up the wiring diagram of your vehicle during the installation process. This will help you identify the CAN High and CAN Low wires needed to connect the Ghost to your vehicle's engine. Double-check all connections to ensure they're secure and insulated.
Once the installation is completed, you are able to start using the Ghost Immobiliser normally. It will shut off the ignition of your vehicle if it isn't started with the correct PIN code which you can assign yourself. The ghost cost of immobilisers can also be set to service/valet mode when you have to surrender your vehicle for servicing or valet parking.